Downloads
The Dimond Roofing & Cladding Manual is a comprehensive document for Architects, Specifiers & Roofers to use when designing projects to meet the capabilities of our roofing systems.
Please contact us if you need any clarification or guidance for our products.
2.1.1 Durability Information
- 2.1.1.1 General Performance Statement
- 2.1.1.2 Environments
- 2.1.1.3 Warranty
- 2.1.1.4 Life Cycle Costing and Maintenance Options
2.1.2 Recommended Installer Programme
2.1.3 General System Design
- 2.1.3.1 Profile Span and Curvature Quick Guide
- 2.1.3.2 Roof Profile Flow Capacity
- 2.1.3.3 Dissimilar Materials
- 2.1.3.4 Thermal Movement
- 2.1.3.5 Condensation
- 2.1.3.6 Flashing Design
- 2.1.3.7 Reflectance Values
2.1 ROOFING & CLADDING PROFILE PERFORMANCE
2.1.4 Specific Design by Profile
Includes sections on Profile Information, Loan/Span/Fastener Detailed Design, Specification and Link to Drawings
2.2.1 Material and Finish
- 2.2.1.1 ColorCote® ZinaCore™ (formerly ZR8)
- 2.2.1.2 ColorCote® ZinaCore X™ (formerly ZRX)
- 2.2.1.3 ColorCote® AlumiGard X™ / AlumiGard™ (formerly ARX and AR8)
- 2.2.1.4 Zincalume®
- 2.2.1.5 Colorsteel® Endura™
- 2.2.1.6 Colorsteel® MAXX™
- 2.2.1.7 Aluminium
- 2.2.1.8 Duraclad
- 2.2.1.9 ColorCote® MagnaFlow™ (formerly ZM8)
- 2.2.1.10 ColorCote® MagnaFlow™ X (formerly ZMX)
- 2.2.1.11 Zinc
- 2.2.1.12 Copper
2.2.2 Underlays
- 2.2.2.1 Bitumen Coated Building Paper
- 2.2.2.2 Synthetic Fire Retardant Underlays
- 2.2.2.3 Galvanised Wire Mesh
2.2.3 Fasteners
- 2.2.3.1 Buildex Screw Fasteners
- 2.2.3.2 Washers
- 2.2.3.3 Decking Clips – Double
- 2.2.3.4 Continuous Clips
- 2.2.3.5 Tee Bolt Assembly
2.2.4 Flashings
- 2.2.4.1 Metal Flashings
- 2.2.4.2 Profiled Foam Strip – Ecofoam
- 2.2.4.3 Dektite Flashings
2.2 ROOFING & CLADDING COMPONENTS
- 2.3.1 Handling and Storage
- 2.3.2 Layout and Fastening
- 2.3.3 Flashings / Penetrations
- 2.3.4 General Workmanship
2.3 ROOFING & CLADDING INSTALLATION INFORMATION
2.4.1 Natural Lighting Systems
- 2.4.1.1 Performance
- 2.4.1.1.1 Natural Lighting System Performance
- 2.4.1.1.2 Durability, Life Cycle Costing, Warranties, Maintenance
- 2.4.1.1.3 Light Transmission Design
- 2.4.1.1.4 Solar Heat Gain Calculation
- 2.4.1.1.5 Load / Span Design
- 2.4.1.1.6 Condensation Control & Insulation
- 2.4.1.1.7 Fire Resistance
- 2.4.1.1.8 Safety
- 2.4.1.1.9 Specification
- 2.4.1.1.10 Detail Drawings
- 2.4.1.2 Components
- 2.4.1.2.1 Profile Range
- 2.4.1.2.2 Barrier Strip
- 2.4.1.2.3 Fasteners
- 2.4.1.2.4 Dimond Skylight Film
- 2.4.1.2.5 Flashings
- 2.4.1.2.6 Mid Span Support
- 2.4.1.2.7 Safety Mesh
- 2.4.1.2.8 Profile Strip
- 2.4.1.3 Installation Information
- 2.4.1.3.1 Handling and Storage
- 2.4.1.3.2 Sheet Layout and Fasteners
- 2.4.1.3.3 Flashings and Stop Ends
- 2.4.1.3.4 General Workmanship
2.4.2 Curved Roofing Systems
- 2.4.2.1 Performance
- 2.4.2.1.1 Curved Roofing Performance
- 2.4.2.1.2 Crimp Curved and Roll Curved Roofing System Design
- 2.4.2.1.3 Drape Curved Roofing System Design
- 2.4.2.1.4 Specification
- 2.4.2.2 Components
- 2.4.2.2.1 Crimp Curved Sheets
- 2.4.2.2.2 Drape Curved Sheets
- 2.4.2.2.3 Roll Curved Sheets
- 2.4.2.2.4 Curved Flashings
- 2.4.2.3 Installation Information
- 2.4.2.3.1 Framing and Fasteners
- 2.4.2.3.2 Sheet Termination
2.4.3 Insulation Systems
- 2.4.3.1 Thermal Insulation Systems
- 2.4.3.1.1 Performance
- 2.4.3.1.2 Components
- 2.4.3.1.3 Installation Information
- 2.4.3.2 Rain Noise Insulation Systems
- 2.4.3.2.1 Performance
- 2.4.3.2.2 Components
- 2.4.3.2.3 Installation
2.4.4 Ventilation Systems
- 2.4.4.1 Performance of Natural Ventilation
- 2.4.4.1.1 Dimond Fixed Ridge Ventilators
- 2.4.4.1.2 Ampelair Wind Driven Ventilators
2.4.5 Safety Systems
- 2.4.5.1 Performance
- 2.4.5.2 Components
- 2.4.5.3 Installation Information For online
2.4 SPECIALISED SYSTEMS INFORMATION
- 3.1.1 Rainwater Disposal System Performance Statement
- 3.1.2 Durability, Warranty, Maintenance
- 3.1.3 Installer Programme
- 3.1.4 Rainwater Disposal System Design
NOTE: Includes sections on Flow Capacity, Thermal Movement, Specification and Detailed Drawings
3.1 RAINWATER PERFORMANCE
3.2 COMPONENTS
- 3.2.1 Materials and Finish
- 3.2.2 Brackets and Fasteners
- 3.2.3 Downpipes
- 3.2.4 Flashings
- 3.2.5 Stop Ends
- 3.2.6 Droppers
3.2 RAINWATER COMPONENTS
- 3.3.1 Handling and Storage
- 3.3.2 Layout and Fixing
- 3.3.3 General Workmanship
3.3 RAINWATER INSTALLATION INFORMATION
- 3.4.1 Product Technical Statement
- 3.4.2 Description
- 3.4.3 Design Instructions
- 3.4.4 Construction Instructions
3.4 RAINWATER DURABILITY, WARRANTY, MAINTENANCE
Select the product you wish to access details and/or downloads for and you will be directed to the downloads section for that product.
Please contact us if you need any clarification or guidance for our products.