Dimondclad Rib50 Cladding

Dimondclad Rib50 Cladding

779mm Cover width

810mm Sheet width

Suitable for residential

Suitable for light commercial

Suitable for commercial

9 ribs per sheet

Dimondclad Rib50 is manufactured in Hamilton.

Suitable for Modern

Suitable for Apartments

Suitable for Townhouses

If this product is not suitable for your project... Click here to find product options suitable for your requirements.

Dimondclad Rib50 Profile

If versatility is what you are after then Dimondclad is the perfect cladding solution. Dimondclad's clean, efficient lines and well concealed laps are excellent for both exterior and interior cladding. Dimondclad Rib50 features wide ribs with narrow pans for the opposite look to Dimondclad Rib20.

Dimondclad Rib50 Profile

Dimondclad Rib50 Profile Dimensions

Cover

779mm

Sheet Width

810mm

Pitch

Wall Cladding Only

all dimensions given are nominal

Sheet Tolerances

Sheet width: ±5mm
Sheet length: +10mm, –0mm. For horizontal wall cladding where notified at time of order of intended use, tighter tolerances can be achieved +3mm, –0mm.

Profile Properties

Material options Steel 0.4mm Aluminium 0.7mm Aluminium 0.9mm
Nominal weight / lineal metre (kg/m) 3.17 1.78 2.28
Unsupported overhang (1) 100 75 100

(1) not intended to support point loads

Roll-forming facility

Hamilton

Sheet lengths: Dimondclad Rib 20 and Rib 50 are custom run to order. Where long sheets are used consideration must be given to:

  • special transportation licences for sheet lengths over 25m
  • site access for special lifting equipment
  • fixing techniques to accommodate thermal expansion.
Find An Installer

Share to social media